- KVM IR extension shaker
- TVLINK modulator coaxial cable infrared shaver
- RF RF modulator infrared extender
- av standard infrared Shared distributor
- Wireless infrared transponders
- Intelligent home infrared centralized processor
- Wired infrared transponder
- Livestock electric infrared transponder
- Made infrared receiver
- Infrared emitter
- The PC card reader
av standard infrared Shared distributor
Welcome to our website!Product introduction
After the digitalization of TV, there is only one set-top box at home, which can only watch TV in the living room, and the TV in the bedroom can not be used. Through our product, we can realize the set-top box watching in the shared living room of the bedroom. Between the set-top box in the living room and the TV set in the bedroom, we use an 8-core copper mesh cable as the conductor to transmit the audio, video and infrared remote control signals of the set-top box at the same time; three signals are shared to the TV set in the bedroom together.
Product characteristics
△ infrared remote control signal is sensitive;
The remote control signal is fast in receiving and response, and there is no delay in real-time forwarding.
△ the receiver is anti fluorescent;
The receiver of this product can be used in most fluorescent lamp environments, with strong anti-interference ability.
△ receiver with status indicator;
The power on status of the receiver is green. When the red light is flashing, it means that your remote control signal has been received and sent to the transmitter. (Fig. 1)
△ the transmitter is the directional transmission of imported chips. If multiple AV appliances are placed together, it will not affect the remote control signal reception of other appliances; (Figure 2)
△ small volume
Small receiver / transmitter / easy to hide.
△ low power consumption
The power is less than 0.3w.
△ AV transmission signal
Compared with wireless or RF transmission, it has no interference and better and more stable image clarity effect.
△ long transmission distance
National standard super five class 8-core oxygen free copper twisted pair, transmission 100m.
Product parameters
input voltage |
90V-230V |
Power waste |
<30瓦 |
Infrared remote
control receiving distance |
≥7M |
Infrared remote
control transmitting distance |
≤20cm |
Matters
needing
attention |
1. Keep away from humid, high temperature, dusty, corrosive and
oxidizing gas environment to avoid damage.
2. Components shall be free from strong vibration, collision, knocking,
falling and damage.
3. Do not touch the power adapter plug of the machine with wet hands.
4. When unplugging the adapter plug from the power socket, please hold
the plug and do not pull the power cord.
5. When the machine is not in use, please turn off the power (if it is
not in use for a long time, please unplug the power adapter)
6. Do not open the cover or touch any device in the machine.
7. Use the power adapter provided by or approved by the manufacturer |
This product has one more AV bus,Some set-top boxes only have one channel of audio and Video AV output. If you want to connect two TVs, you need to separate two channels of audio and video to connect two TVs. If you use RCA one-half to divide, it is not recommended to use it, because the video uses ordinary RCA one-half to divide, which is equal to half of impedance reduction, causing easy interference. One more AV head can solve this problem.